The Foil Drive v2 Motor Puck features a re-designed shape specific for use with the v2 Motors and their Removable V2 Motor Cable. When installing the puck, the cable must first be plugged into the Motor, then the Puck is installed over the top of the cable with the cut-out slot aligning with that on the motor cable. 

Provided hardware (4x M4 16mm Bolts) then lock the system in place. 

Note: The v2 Motor Puck is ONLY compatible with v2 motors for Gen2 systems. The v2 Puck utilises slightly shorter installation hardware than the original v1 Pucks.

Included:

1x Injection Moulded Motor Puck
4x M4 16mm Bolts