Gul Viper Elite 4/3 BS Chest Zip Wetsuit
VR1234
Please choose an option:
VIPER elite 4/3 BS CHEST ZIP WETSUIT - black only
Guls' Top End wetsuit! A suit to take seriously, loaded with all the features you would expect from something a lot more expensive. If you want quick dry linings, ultra stretch neoprene, taped internal seams, then you have found your perfect wetsuit.
A Suit to take seriously, loaded with all the features you would expect from something a lot more expensive.
If you want quick dry linings, ultra stretch neoprene, taper internal seams, then you have found your perfect wetsuit.
OVERVIEW
- BLINDSTITCHED: Seam construction
- NEONSEAM: super thin 4mm liquid seam
- RS-FLEX: 150% textured superstretch
- X-FLEX: 150% super-stretch main body
- BOLT DRY: Thermal quick dry core
- G-TAPE: Inner waterproof X-Flex taping fuses seams together for additional reinforcement.
- MESH: back to prevent wind chill
- POWERTEX4: knees for flexibility & durability
- AQUA- RING: wrist seals
- KEY POCKET: lower calf pocket with key loop
- QUADRATE: Horizontal bib chest zip entry
- PK MICRO ZIP: waterproof low profile zip
- Non-petroleum based neoprene
ABS
This diagonal zip entry system, has a single sided opening reducing flush. The Glideskin seal and bungee cord / barrel lock keeps more water out.
A snap lock ensures that the zip pull stays in place.
RS-FLEX-MK2
RS Flex MK2 is the latest evolution of RS Flex neoprene! Now with over 150% + stretch the Ripstop is 10% lighter, the tighter weaved textile provides less water absorption, better durability, and maximum stretch.
FX:LITE
Fx:light neoprene is 15% lighter than X-flex neoprene. Made with more air cells to increase warmth and decrease weight. It"s hydrophobic properties absorbs less water, providing superior warmth and durability.
NEOTAPE
Neonseam
Panels are glued and blindstitched and finished with a 4mm razor thin coloured liquid silicon based urethane. The result being a strong yet flexible seam that is watertight and durable whilst reducing the abrasion to skin.
Blindstitch
Panels are double glued and then butted together followed by stitching that does not penetrate all the way through the neoprene. Inside the wetsuit, heat welded tape goes over the seams in high stress areas, this further strengthens the seams.
Aquaring
Wrist seals to reduce water penetration whilst increasing comfort, creating a snug fit on your wrist minimising flush.
