Harken Cam-Matic® ball bearing cam cleats engage and release easily, hold securely, and work with a wide range of line types and sizes. Cam teeth are smooth to protect line and because tooth grip is not required to close the pawls.

Multiple rows of UV-stabilized, Delrin® ball bearings provide minimal friction for easy line engagement and release, even under high loads.

The easy entry system allows line to engage without being drawn through the cam; just pull the line straight down and the cam opens and holds perfectly.

Lightwight, fiber-reinforced Carbo-Cams® are for racing where weight is critical, or where adjustments are less frequent.

Tough, lightweight Cam-Matic cleat has carbon-matrix pawls, two rows of carbon-black Delrin® ball bearings, and stainless steel wear-strip.

An optional fairlead allows the cleat to be used when lines enter or leave the cam at unfair angles.

Specifications:

Height: 1-3/32"
Length: 2-9/16"
Width: 1-1/4"
Weight: 1.44 oz.
Minimum line diameter: 1/8"
Maximum line diameter: 3/8"
Fastener spacing: 1-1/2"
Maximum working load: 200 lb.
Breaking load: 500 lb.
Fasteners: #10 (5 mm) FH
.