.

Our CFbyLandL® carbon fibre tiller for ILCA or Laser.

There are two types available - low profile version for the newer ILCA and higher profile for the older Laser - please see details of both tiller types below.

Now also available with a White finish! (Photos to follow.)

Our innovative ILCA / Laser tiller has the following features:

• Metal traveller wear plate is inset into the tiller to keep it low profile and eliminate the need for tape to hold it in place.
• The inboard / cockpit end of the tiller is solid (not open ended) and has a slim depth to help prevent any potential 'snagging' on the traveller cleat.
• Supplied with our Pop_Off_UJ® base (which is compatible with the old RWO Omniflex UJ) which is held in place with countersunk stainless steel bolts (not rivets) to make life easier if you ever need to change the UJ base (no drilling and riveting required).
• Supplied with fitted Clamcleat® CL277AN side entry cleat on an isolator plate.
• Slim design (only a fraction wider than the UJ base).
• Lightweight. Weighs around just 285 grammes including UJ base and cleat.
• 972mm long x 27mm wide (not including cleat) x 10mm deep (inboard end not including UJ base) to 16mm deep (not including end of tiller which goes into the rudder stock).