Included in Windfoil kit:

Config 1:

F1800 low speed front wing
large 260 cm2 stabilizer
long fuselage

Config 2:

F770 freeride front wing - standard

standard 180cm2 stabilizer

long fuselage

Config 3:

F770 freeride front wing - standard

standard 180cm2 stabilizer

short fuselage

All configs include:

86 cm mast
long nose for windfoil
fuselage tail
screws set
tef gel kit
spacers set
allen key set
mantafoils bag

Windfoil Freeride
Entry and intermediate level hydrofoil, stable, super easy for beginners. Moderate speed take off and high top speed. Provides higher speed and maneuverability over the 3 in 1 kit.

The new Manta Mono Wind-foil set contains all the bits you need to have an inspiring experience flying over the water. The Manta Mono Wind-foil is made for a fast and controlled ride with plenty of manouverability. With the long mast the flight is easy to control and the long nose ensures, that the produced lift is acting underneath the rider, who is standing further on the front of the board compared to Kite - foiling. Spacer and screws allow to adjust the angle of the stabilizer wind at the back. When it faces upward, the lift is enhanced and moves further to the front, which lifts the board earlier. Facing downwards, the stabilizer reduces the lift and higher speeds can be reached, as the centre of effort moves back. To protect the fin box and board from damage caused by the lateral forces acting, a tuttle box load plate and rubber protector is also provided. Please note that all connections should be checked that they are secured tightly before use.  The High speed and vibration can cause connections to work lose.

The optional load plate distributes the load evenly on a larger area around the fin box. 

Above: This is how you want your gear to look after a WindFoiling session (MantaFoil with the load plate)

Below: This is how you don't want your gear to look after WindFoiling session (different brand foil without load plate, heavy impact)