SUP Surf Hydro foil set with 3 in 1 wing.  Short mast, Short nose, standard fuselage

Included in SUPfoil kit:

easyflight G10 front wing
stabilizer G10
65cm mast
standard (short) fuselage
long nose for windfoil / supfoil
fuselage tail
screws set
tef gel kit
spacers set
allen key set
mantafoils bag

The new Manta Mono SUP-hydrofoil set contains all the bits you need to have an inspiring experience flying over the water. With the shorter mast the flight is easy to control and the long nose ensures, that the produced lift is acting underneath the rider, who is standing further on the front of the board compared to Kite - foiling. Spacer and screws allow to adjust the angle of the stabilizer wind at the back. When it faces upward, the lift is enhanced and moves further to the front, which lifts the board earlier. Facing downwards, the stabilizer reduces the lift and higher speeds can be reached, as the centre of effort moves back.  Please note that all connections should be checked that they are secured tightly before use.  The High speed and vibration can cause connections to work lose.

When SUP-foiling in an non-foil board please also mount the load plate beneath your fin box to avoid damages! The load plate distributes the load evenly on a larger area around the fin box. 

Above: This is how you want your gear to look after a WindFoiling session (MantaFoil with the load plate)

Below: This is how you don't want your gear to look after WindFoiling session (different brand foil without load plate, heavy impact)